There’s nothing worse than walking into your home on a cold winter day and realizing that the heating system has stopped working. If you find yourself in this situation, don’t panic! Your local experts are to the rescue! When your unit fails, you need to schedule a heating repair in Eagle Point, OR to restore your comfort and the unit’s operation.
But what exactly causes your heater to fail? Knowing the common reasons why your heater stops working as a homeowner can help prevent future issues. Here are ten of the most common causes of a broken heating system and what you can do to fix it.
Clogged Filter
A clogged filter is never a fun thing for your heating system. This occurs when the air filter becomes filled with dirt, dust, and other debris. When this happens, the unit has insufficient airflow to work properly.
Fortunately, this is an easy problem to fix—simply replace the air filter, and your heating should be back up and running in no time. Do this every few months or more often to maintain your system and prevent any future issues. Schedule a heating repair Eagle Point, OR if it’s not the filter that causes the problem.
Thermostat Issues
If your thermostat is not set correctly or malfunctioning, it can prevent your furnace from turning on. If you have recently changed your thermostat settings or if they appear incorrect, double-check them and make sure they are correct before calling in a technician.
Also, check to see if the batteries need replacing—this could be causing the issue as well. Ask your local heating technician for heating repair Eagle Point, OR to check the thermostat settings and troubleshoot any potential issues.
Pilot Light Outage
If you have an older furnace with a pilot light, sometimes this light can blow out due to weather changes or drafts in your home. If this happens, simply relight the pilot light and see if that solves the issue.
If not, call in a professional who can help diagnose any further issues that may be present with the furnace itself. Your pilot light may have gone out due to a larger problem, so be sure to contact your local technician for heating repair Eagle Point, OR.
Faulty Wiring
A broken heating system can be caused by faulty wiring within the unit itself or within your home’s electrical system. If you suspect this may be an issue, turn off the power to the unit immediately and call in an electrician or technician for help diagnosing any potential wiring problems.
Remember, the electrical repair is not a DIY task. Risks of electrocution, fire, and damage to the unit are too dangerous to attempt on your own. Leave this heating repair Eagle Point, OR to the hands of the experts.
Faulty Parts
One of the parts of your furnace may have gone bad or worn down over time due to wear-and-tear or age-related issues. This could include components, such as motors or blower fans, which may need a replacement for your heating system to function properly.
In cases like these, it’s best to call in a professional who can diagnose any faulty parts and replace them as quickly as possible so that your heater will start working again soon!
Damaged Heat Exchanger
The heat exchanger is an important part of your furnace, as it transfers the heat from the gas combustion chamber to the air circulating in your home. If this part of the furnace has become damaged over time, it can prevent your unit from heating at all. You will need a heating repair Eagle Point, OR this time.
If you suspect an issue with the heat exchanger, call a technician immediately for heating repair so they can take care of the problem and get your heater back up and running as soon as possible.
Blown Heater Fuse
The fuse prevents your furnace from overheating and potentially causing a fire. If the fuse has blown, you will need to replace it with a new one that matches your unit’s specifications.
However, an underlying issue may need addressing if the fuse keeps blowing or short-circuiting regularly. This can be caused by something more serious, like a problem with the wiring.
Be sure to contact a technician for heating repair Eagle Point, OR. They can diagnose and repair any underlying issues that may be causing the fuse to blow in the first place.
Faulty Blower Motor
If you have an older unit with a belt-driven fan, the blower motor can wear down over time and prevent your furnace from functioning properly. You may need to replace the blower fan belt if it is worn down or has snapped due to age-related issues.
In cases like these, it’s best to call in a professional who can diagnose any faulty parts and replace them as quickly as possible so that your heater will start working again soon!
Leaky Ductwork
If you have leaky ductwork, it can prevent your furnace from producing the heat you need. Ducts can develop gaps, cracks, or holes over time that prevent your heater from working properly. They can allow the heated air to escape, reducing the heat produced while allowing the cold outside air to seep in, making your home uncomfortable.
Also, your duct system can get clogged with dirt, dust, and debris, giving your furnace a hard time when it comes to heating your home. Additionally, water leaks can occur due to blocked drains or condensation buildup in your air ducts, resulting in mold growth and potential health hazards.
For these kinds of issues, it’s best to contact a technician for heating repair Eagle Point, OR. They can diagnose and repair any underlying problems with your ductwork so you can get back to comfortable temperatures in no time!
Moldy Furnace
Mold can grow in your furnace due to moisture buildup, resulting in a musty smell and potential health hazards. If this is the case, you’ll need a professional to come and inspect your furnace for mold and take the necessary steps to get rid of it.
They can use special cleaners or sealants to treat the affected area and ensure no further growth occurs. Call a technician today if you suspect mold in your furnace.
High Energy Consumption
A furnace that is working inefficiently can cause higher energy bills. An old unit, faulty parts, or clogged air filters can cause this. Old units, over time, become less efficient and need to be replaced. Defective parts can prevent your furnace from working properly, causing it to consume more energy than necessary. Clogged air filters can restrict the airflow inside your unit, making it work harder and use more energy in the process.
For these problems, it’s best to call a technician for heating repair Eagle Point, OR. They can diagnose the issue and get your heater back up and running efficiently in no time.
Overrun Heat Pump
Other homeowners use heat pumps as heating sources. If your heat pump is not working efficiently, it could indicate an underlying issue. An overrun heat pump can be caused by a clogged filter, restricted airflow, low refrigerant levels, or even a faulty thermostat.
Your local technician can help identify the cause of the issue so you can avoid costly repairs down the line.
These are just a few of the most common causes of a broken heating system. If you suspect any issue with your furnace or have questions about potential repairs, be sure to call in a professional who can help diagnose any underlying problems and provide you with the best advice on how to fix them.
Never attempt heating repair Eagle Point, OR on your own—it’s always best to leave these tasks to the hands of the experts! That way, you can know that your heating system is in good condition and running smoothly.
Addressing the Issues Earlier Can Prevent Costly Repairs
When it comes to fixing broken heating systems, several potential causes range from simple clogged filters to more complex wiring problems within your home’s electrical system.
To ensure that everything runs smoothly during cold winter months when temperatures drop below freezing levels outside, homeowners must take note of those common reasons why their heating systems stopped working. It will help them stay prepared if any issues arise with their units at home! With this knowledge, you can prevent further damage by calling the experts for heating repair Eagle Point, OR as soon as issues are noticed.
Call Lam-Air Heating & Air Conditioning for Heating Repair in Eagle Point, OR
No matter the cause of a failing heater, you can count on your local HVAC specialists to help diagnose the issue and provide fast, reliable heating repair in Eagle Point, OR. Lam-Air Heating & Air Conditioning is here to help! We service all makes and models of heating systems and offer top-quality repair, maintenance, and installation services at competitive rates.
Contact us for any questions about heating repair or tune-ups you may have. We’re here to keep your home warm and cozy this winter season. Dial (541) 287-7597 to set an appointment or learn more about our services.
Let us help you save money and get your heater back up and running as soon as possible.